Graham Forge

“Altas Forge and tool's biggest, most advanced bladesmith forge yet!”

• Chamber measures 5″ diameter × 13″
• 4″ × 2″‘ rear opening
• Max temp of 2300° F
• 390+ BTU per cubic inch
• Hot enough to forge weld!
• Welded leg plates with integrated tool rest holder

Want a better forge for bladesmithing, one that’s going to last longer, get hotter, and use less propane than forges on eBay and Amazon?  Then this is for you.  With a 5″ diameter x 13″ long chamber, the Graham has plenty of room for even the biggest kukri, and hot enough for big billets of damascus.  With a blown burner now standard, you have complete control over your atmosphere.

The Graham forge uses Kastolite 50-25 plus cast refractory, cured and baked for 6 hours at 450°F.  Ready to use right out of the box and it will last much longer than wool based forges.

We include a bag of Plistix 900f. Although not required for use, this easy-to-apply refractory is painted on the inside of the chamber and improves efficiency. Simply mix with water, wet the chamber with a squirt bottle or wet rag and paint the 900f on.

We also improved the construction level of this forge.  With 1/8″ thick stainless tubing, TIG welded end plates, and a tough, cast refractory shell, it’s built to last!  Heck, we even managed to make the toolrest stronger.

Includes:

• Forge w/ adjustable sliding tool rest
• 0-20 PSI regulator w/hose connects to 20lb. propane tanks
• New Firestorm 100k BTU blown burner (12VDC powered wall transformer)
• 16 oz Plistix 900F