Unpainted - Brodbeck Mega Package: 2x72 Grinder with 2HP VFD


Price:
Sale price$5,750.00 CAD

Description

Shipping will be charged at actual shipping in a separate invoice.   It is best to order this item separately from your other purchases. 


Mega Package: 2x72 Grinder with 2HP VFD

The Mega Package includes a 2HP motor, VFD, small wheel kit, and  a10” contact wheel, buffing wheel, slack belt attachment, and our integral bolster and fullering attachments.

The chassis includes all parts & hardware items to assemble the grinder complete with 10” flat platen and over-sized adjustable work rest. This kit includes aluminum wheels: 2” Platen, 4” Tracking, and 5” Drive with 5/8” bore (other sizes can be requested at an additional cost).

Variable Speed Motor:

KBAC 27D VFD 115V (household voltage) or 230V single phase input. 230V 3-Phase output (115V input reduces motor output from 2HP to 1.5HP). Variable Speed Wiring Kit includes start/stop switch, wiring, and connectors.

2HP 3600 208-230/460/3/50-60 TEFC 56C ROLLED STEEL PREMIUM 10:1 CT ~ 20:1 VT
IP55 CLASS F 1.15SF REMOVABLE BASE

INCLUDED ATTACHMENTS;

Contact Wheel:

10” Diameter Contact Wheel, Bracket, Arm, and Hardware.

Used for the fastest general material removal and for hollow ground bevels, and handle shaping.

Small Wheel Kit:

Small Wheel Bracket, 3/4” Wheel, 1” Wheel, 2” Guide Wheel, and Hardware

Used for small radius curves, texturing, and cleaning the spine and the handle's underside. The rubber coated wheels eliminate the belt bump and provide a smooth and even finish. 

Mareko Deep Platen

The Mareko Deep Platen is a combination of a flat platen, 4” contact wheel, and slack belt. It was designed by knifemaker Mareko Maumasi to provide maximum value and efficiency as it minimizes tool changes. The extra depth allows the user to work both sides of the platen without the tool arm interfering with the work. This is particularly important when removing stock and when contouring handles. This platen is a great alternative and cost reduction to having a dedicated flat platen and a contact wheel.

Adjustable Work Rest

The adjustable Work rest has been designed for maximum tilting in both directions as well as height adjustability. It is great for cutting false edges, bevels, clip points, octagonal handles, and fullers with our fullering tool. The work rest is constructed of 5/16 and 3/8 thick plate steel to ensure durability and stability. The double pinch design was chosen to eliminate accidental rotation typically observed with other adjustable tool rest designs that use a round bar and set screws for adjustment. The adjustment handles also allow full adjustment without the need of tools for ease of use and maximum efficiency.

Buffing Wheel Attachment:

This attachment utilizes a sanding belt to drive a 5/8-11 threaded arbor. This arbor size is commonly used in readily available wire wheels and buffing wheels. This attachment comes with the wheel, arbor, mounting bracket, and hardware. 

Note:

 A variable-speed drive system is required for this attachment. All wheels used on the arbor are to be operated at their rated rpm.

Disc Sander Attachment:

This attachment utilizes a sanding belt to drive a precision ground 9-inch disk plate. It comes with a mounting bracket, drive wheel, 9-inch plate, and all the necessary hardware. Sandpaper and adhesive are not included. 

Note:

 A variable-speed drive system is required for this attachment. All wheels used on the arbor are to be operated at their rated rpm.

Integral Bolster and Fullering Attachment:

The Brodbeck Integral Bolster and Fullering Attachment features 3 different roller sizes 5/8", 7/8", 1-1/8". They are easily swapped out without tools, and there are no adjustments needed. The platen is fixed in place and made of thick steel that will not warp with heat.

This attachment also doubles as a fullering tool. The rollers stick out past the holder so there is no interference with anything.

Note:

A variable speed drive system is required for this attachment. The 5/8 & 7/8 rollers are only rated to 20000 rpm.

Quick-Change Accessory Arm:

This can be used to mount our Small Wheel Attachment, Integral Attachment, Buffing Attachment, Disk Sander and more to come. It is used in place of the Platen D-plate. It comes with a quick-change adjustable mounting plate, a 1.5-inch square aluminum arm, and the necessary hardware.

NO welding is required for assembly.

Chassis arrives unpainted. 

 

You may also like

Recently viewed